From AlainBechetoille at brouns.fr Mon Jun 2 10:41:52 2008 From: AlainBechetoille at brouns.fr (Alain Bechetoille) Date: Mon, 02 Jun 2008 19:41:52 +0200 Subject: [Synckolab] sync interval dependent on configuration Message-ID: <484430E0.2000101@brouns.fr> In the Synckolab options, because of the interface layout, you get the impression that you can setup for each configuration the sync interval, hide window ... But if you modify the sync interval for one configuration, you modify the sync interval for all configurations. If the sync interval was dependent of the configuration, then you could create a configuration that often update (e.g. for calendar and tasks) and another configuration with a long sync interval for "heavy files" (e.g. contacts book). Win2000 Thunderbird 2.0.0.14 Synckolab 0.6/1.0 From glua at 4-mail.net Wed Jun 4 06:57:29 2008 From: glua at 4-mail.net (Julian Golderer) Date: Wed, 04 Jun 2008 15:57:29 +0200 Subject: [Synckolab] using unsubscribed folders Message-ID: <48469F49.3080205@4-mail.net> hi list, sorry, i'm new here and couldn't find this question in the faq. here it is: is there a way to use unsubscribed folders for data storage or to hide them in thunderbird (like it's possible in kontact/kmail)? thanks julian From niko.berger at corinis.com Wed Jun 4 06:59:48 2008 From: niko.berger at corinis.com (Niko Berger) Date: Wed, 04 Jun 2008 15:59:48 +0200 Subject: [Synckolab] using unsubscribed folders In-Reply-To: <48469F49.3080205@4-mail.net> References: <48469F49.3080205@4-mail.net> Message-ID: <48469FD4.6070500@corinis.com> Julian Golderer wrote: > hi list, > > sorry, i'm new here and couldn't find this question in the faq. here it is: > > is there a way to use unsubscribed folders for data storage or to hide > them in thunderbird (like it's possible in kontact/kmail)? > > thanks > > julian > No this is not possible. Maybe there is an addon that hides folders, but its not possible right now with synckolab. Niko From sledz at zone42.org Thu Jun 5 05:17:40 2008 From: sledz at zone42.org (Steffen Sledz) Date: Thu, 05 Jun 2008 14:17:40 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <483EE1E4.1040009@zone42.org> References: <483EE1E4.1040009@zone42.org> Message-ID: <4847D964.8000501@zone42.org> Hmmmm? No response after a week? Is this common in this mailing list? :( From niko.berger at corinis.com Thu Jun 5 05:25:30 2008 From: niko.berger at corinis.com (Niko Berger) Date: Thu, 05 Jun 2008 14:25:30 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <483EE1E4.1040009@zone42.org> References: <483EE1E4.1040009@zone42.org> Message-ID: <4847DB3A.40101@corinis.com> Steffen Sledz wrote: > May be this is an FAQ but i didn't found anything on it at the website. > I've tried SyncKolab for the first time, but i can't get it work. :( > > When i make the first sync of the local addressbook with the server > everything starts fine. But then the sync stops at about 80% without any > info/warning/error. I set the error console level to debug but there is > no useful information. The last logs are: > > "354 - Finished syncing adress book" > "1 - Setting all messages to read..." > "Running compact" > > SyncKolab is 1.0.0 (it says 0.6.2 in the settings dialog) > > TB is 2.0.0.14 (tried at Linux and WinXP) > > Lightning is 0.8 > > IMAP servers i tried are dovecot 1.0.13 and MS Exchange > > Thx for any help, > Steffen > The same problem has been reported already a few times - it seems to be a problem with the imap server not liking the compact ... Until now I was unable to reproduce that, doh Niko From niko.berger at corinis.com Thu Jun 5 05:26:14 2008 From: niko.berger at corinis.com (Niko Berger) Date: Thu, 05 Jun 2008 14:26:14 +0200 Subject: [Synckolab] sync interval dependent on configuration In-Reply-To: <484430E0.2000101@brouns.fr> References: <484430E0.2000101@brouns.fr> Message-ID: <4847DB66.3010807@corinis.com> Alain Bechetoille wrote: > In the Synckolab options, because of the interface layout, you get the > impression that you can setup for each configuration the sync interval, > hide window ... > But if you modify the sync interval for one configuration, you modify > the sync interval for all configurations. > > If the sync interval was dependent of the configuration, then you could > create a configuration that often update (e.g. for calendar and tasks) > and another configuration with a long sync interval for "heavy files" > (e.g. contacts book). > > Win2000 Thunderbird 2.0.0.14 Synckolab 0.6/1.0 > > > True, I will make it so it actually is for every conifguration (maybe you can open an "enhancement" bug in bugzilla) Niko From sledz at zone42.org Thu Jun 5 05:30:49 2008 From: sledz at zone42.org (Steffen Sledz) Date: Thu, 05 Jun 2008 14:30:49 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <4847DB3A.40101@corinis.com> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> Message-ID: <4847DC79.3030506@zone42.org> Niko Berger schrieb: > The same problem has been reported already a few times - it seems to be > a problem with the imap server not liking the compact ... Until now I > was unable to reproduce that, doh Sorry for asking this one more time. Is there an FAQ list for this list? I couldn't find some. As mentioned i tried two different IMAP servers (dovecot and MS Exchange). Is there a list with known working or non-working servers? Is this "compact" really necessary? Can i disable it somewhere? Steffen From niko.berger at corinis.com Thu Jun 5 05:44:26 2008 From: niko.berger at corinis.com (Niko Berger) Date: Thu, 05 Jun 2008 14:44:26 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <4847DC79.3030506@zone42.org> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> Message-ID: <4847DFAA.60909@corinis.com> Steffen Sledz wrote: > Niko Berger schrieb: > >> The same problem has been reported already a few times - it seems to be >> a problem with the imap server not liking the compact ... Until now I >> was unable to reproduce that, doh >> > > Sorry for asking this one more time. Is there an FAQ list for this list? > I couldn't find some. > > As mentioned i tried two different IMAP servers (dovecot and MS > Exchange). Is there a list with known working or non-working servers? Is > this "compact" really necessary? Can i disable it somewhere? > > Steffen > you can only disable the compact in the source code.. I am not sure if it helps, but you are free to try it out. I just created a new nightly (at www.gargan.org) with compact disabled. try it out and tell me if it fixed the problem. the compact should update the folder and make sure all current messages are available. It probably is not really necessary.. lets see Niko From lfarkas at lfarkas.org Thu Jun 5 05:54:19 2008 From: lfarkas at lfarkas.org (Farkas Levente) Date: Thu, 05 Jun 2008 14:54:19 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <4847D964.8000501@zone42.org> References: <483EE1E4.1040009@zone42.org> <4847D964.8000501@zone42.org> Message-ID: <4847E1FB.6080406@lfarkas.org> Steffen Sledz wrote: > Hmmmm? No response after a week? Is this common in this mailing list? i also have the same problem. we've got ~2600 contact entry and about after 2400 is hang forever (until then it's fast). win xp sp3, thunderbird-2.0.0.14, synckolab-1.0, dovecot-1.0.13-6. what else can i do? who can i debug the problem? -- Levente "Si vis pacem para bellum!" From niko.berger at corinis.com Thu Jun 5 05:56:43 2008 From: niko.berger at corinis.com (Niko Berger) Date: Thu, 05 Jun 2008 14:56:43 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <4847E1FB.6080406@lfarkas.org> References: <483EE1E4.1040009@zone42.org> <4847D964.8000501@zone42.org> <4847E1FB.6080406@lfarkas.org> Message-ID: <4847E28B.6060308@corinis.com> Farkas Levente wrote: > Steffen Sledz wrote: > >> Hmmmm? No response after a week? Is this common in this mailing list? >> > > i also have the same problem. > we've got ~2600 contact entry and about after 2400 is hang forever > (until then it's fast). > win xp sp3, thunderbird-2.0.0.14, synckolab-1.0, dovecot-1.0.13-6. > what else can i do? who can i debug the problem? > > this is a completely different problem you have: check the error console for any parsing errors or something like that in the error console (thats normally what happens when it hangs "in the middle" of sync). Steffens problem happened AFTER sync was done. Niko From lfarkas at lfarkas.org Thu Jun 5 06:38:00 2008 From: lfarkas at lfarkas.org (Farkas Levente) Date: Thu, 05 Jun 2008 15:38:00 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <4847E28B.6060308@corinis.com> References: <483EE1E4.1040009@zone42.org> <4847D964.8000501@zone42.org> <4847E1FB.6080406@lfarkas.org> <4847E28B.6060308@corinis.com> Message-ID: <4847EC38.5050907@lfarkas.org> Niko Berger wrote: > Farkas Levente wrote: >> Steffen Sledz wrote: >> >>> Hmmmm? No response after a week? Is this common in this mailing list? >>> >> i also have the same problem. >> we've got ~2600 contact entry and about after 2400 is hang forever >> (until then it's fast). >> win xp sp3, thunderbird-2.0.0.14, synckolab-1.0, dovecot-1.0.13-6. >> what else can i do? who can i debug the problem? >> >> > this is a completely different problem you have: check the error console > for any parsing errors or something like that in the error console > (thats normally what happens when it hangs "in the middle" of sync). > Steffens problem happened AFTER sync was done. ok i check the error console and this's what i see (this's with your today nightly): -------------------------------------------- Hiba: [Exception... "Component returned failure code: 0x80004002 (NS_NOINTERFACE) [nsIAbDirectory.deleteCards]" nsresult: "0x80004002 (NS_NOINTERFACE)" location: "JS frame :: chrome://synckolab/content/addressbook.js :: anonymous :: line 545" data: no] Forr?sf?jl: chrome://synckolab/content/addressbook.js Sor: 545 -------------------------------------------- -- Levente "Si vis pacem para bellum!" From c at hundsrucker.de Thu Jun 5 15:23:22 2008 From: c at hundsrucker.de (Christian Hundsrucker) Date: Fri, 06 Jun 2008 00:23:22 +0200 Subject: [Synckolab] uncaught exception: Contentlength not available (not a local URL?) - progress Message-ID: <4848675A.4090309@hundsrucker.de> Hi there! I had the same problem as HC... Tried two different imap-providers but the key was the suggestion to kick out another add-on. In my case it was the 'ing plaxo add-on. Removed it and everything seems to be fine. Thanx Niko - looks like a great tool! From mihaly.vukovics at kk.pte.hu Thu Jun 5 23:43:01 2008 From: mihaly.vukovics at kk.pte.hu (Vukovics Mihaly) Date: Fri, 06 Jun 2008 08:43:01 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <4847DFAA.60909@corinis.com> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> Message-ID: <4848DC75.9020800@kk.pte.hu> Helo Niko! I have just installed your nightly build (1.0.1, http://www.gargan.org/extensions/synckolab-NIGHTLY.xpi). The error console still says "Running Compact", and the syncronisation still hangs there. :( Vuki Niko Berger wrote: > Steffen Sledz wrote: >> Niko Berger schrieb: >> >>> The same problem has been reported already a few times - it seems to be >>> a problem with the imap server not liking the compact ... Until now I >>> was unable to reproduce that, doh >>> >> Sorry for asking this one more time. Is there an FAQ list for this list? >> I couldn't find some. >> >> As mentioned i tried two different IMAP servers (dovecot and MS >> Exchange). Is there a list with known working or non-working servers? Is >> this "compact" really necessary? Can i disable it somewhere? >> >> Steffen >> > you can only disable the compact in the source code.. I am not sure if > it helps, but you are free to try it out. I just created a new nightly > (at www.gargan.org) with compact disabled. try it out and tell me if it > fixed the problem. > > the compact should update the folder and make sure all current messages > are available. It probably is not really necessary.. lets see > > Niko > _______________________________________________ > Synckolab mailing list > Synckolab at mozdev.org > https://www.mozdev.org/mailman/listinfo/synckolab > -- K?sz?nettel: Vukovics Mih?ly P?csi Tudom?nyegyetem Klinikai K?zpont Informatikai ?s Telekommunik?ci?s Vezet? / CIO P?cs, Honv?d utca 1. Tel: +36 72 536-400 Fax: +36 72 536-401 Mobil: +36 30 620 5304 Informatikai Vezet?k Tars?s?ga http://www.ivetar.hu From sledz at zone42.org Fri Jun 6 01:23:47 2008 From: sledz at zone42.org (Steffen Sledz) Date: Fri, 06 Jun 2008 10:23:47 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <4848DC75.9020800@kk.pte.hu> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> <4848DC75.9020800@kk.pte.hu> Message-ID: <4848F413.3080505@zone42.org> Vukovics Mihaly schrieb: > I have just installed your nightly build (1.0.1, > http://www.gargan.org/extensions/synckolab-NIGHTLY.xpi). > > The error console still says "Running Compact", and the > syncronisation still hangs there. :( I can confirm this behaviour. Sync Kolab version is 1.0.1 05-06-2008 14:19. From niko.berger at corinis.com Fri Jun 6 01:32:17 2008 From: niko.berger at corinis.com (Niko Berger) Date: Fri, 06 Jun 2008 10:32:17 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <4848F413.3080505@zone42.org> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> <4848DC75.9020800@kk.pte.hu> <4848F413.3080505@zone42.org> Message-ID: <4848F611.7030104@corinis.com> Steffen Sledz wrote: > Vukovics Mihaly schrieb: > >> I have just installed your nightly build (1.0.1, >> http://www.gargan.org/extensions/synckolab-NIGHTLY.xpi). >> >> The error console still says "Running Compact", and the >> syncronisation still hangs there. :( >> > > I can confirm this behaviour. > Sync Kolab version is 1.0.1 05-06-2008 14:19. > Hmmm... seems to be something else. I created a new nightly where i changed the messages a little bit (and renamed the function, maybe thats the problem). You should now see: about to run compact... Running compact nextSync ... the compact itself is still disabled. There should be no reason why this stopps at this point now. Can you please test and tell me if its working (if it is, I will enable compact again, because then it was the function name thats the problem) Niko From sledz at zone42.org Fri Jun 6 01:51:18 2008 From: sledz at zone42.org (Steffen Sledz) Date: Fri, 06 Jun 2008 10:51:18 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <4848F611.7030104@corinis.com> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> <4848DC75.9020800@kk.pte.hu> <4848F413.3080505@zone42.org> <4848F611.7030104@corinis.com> Message-ID: <4848FA86.6040908@zone42.org> Niko Berger schrieb: > Hmmm... seems to be something else. I created a new nightly where i > changed the messages a little bit (and renamed the function, maybe thats > the problem). > You should now see: > > about to run compact... > Running compact > nextSync > ... > > the compact itself is still disabled. There should be no reason why this > stopps at this point now. > Can you please test and tell me if its working (if it is, I will enable > compact again, because then it was the function name thats the problem) Now it seems to work: 600 - Finished syncing adress book Setting all messages to read... about to run compact... 2904 - Running compact 1 - nextSync 218 - Initialising calendar... 109 - Initialising calendar... 95 - Initialising calendar... 10 - Initialising calendar... From niko.berger at corinis.com Fri Jun 6 01:53:50 2008 From: niko.berger at corinis.com (Niko Berger) Date: Fri, 06 Jun 2008 10:53:50 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <4848FA86.6040908@zone42.org> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> <4848DC75.9020800@kk.pte.hu> <4848F413.3080505@zone42.org> <4848F611.7030104@corinis.com> <4848FA86.6040908@zone42.org> Message-ID: <4848FB1E.9080807@corinis.com> Steffen Sledz wrote: > Niko Berger schrieb: > >> Hmmm... seems to be something else. I created a new nightly where i >> changed the messages a little bit (and renamed the function, maybe thats >> the problem). >> You should now see: >> >> about to run compact... >> Running compact >> nextSync >> ... >> >> the compact itself is still disabled. There should be no reason why this >> stopps at this point now. >> Can you please test and tell me if its working (if it is, I will enable >> compact again, because then it was the function name thats the problem) >> > > Now it seems to work: > > 600 - Finished syncing adress book > Setting all messages to read... > about to run compact... > 2904 - Running compact > 1 - nextSync > 218 - Initialising calendar... > 109 - Initialising calendar... > 95 - Initialising calendar... > 10 - Initialising calendar... > Ok then its clear: it was the "name" of the function that called compact that seemed to interfere with some other extension. I reenabled the "compact" funcitonality again and created anew nightly... thanks guys Niko From lfarkas at lfarkas.org Fri Jun 6 02:27:44 2008 From: lfarkas at lfarkas.org (Farkas Levente) Date: Fri, 06 Jun 2008 11:27:44 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <4848FB1E.9080807@corinis.com> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> <4848DC75.9020800@kk.pte.hu> <4848F413.3080505@zone42.org> <4848F611.7030104@corinis.com> <4848FA86.6040908@zone42.org> <4848FB1E.9080807@corinis.com> Message-ID: <48490310.4060506@lfarkas.org> Niko Berger wrote: > Steffen Sledz wrote: >> Niko Berger schrieb: >> >>> Hmmm... seems to be something else. I created a new nightly where i >>> changed the messages a little bit (and renamed the function, maybe thats >>> the problem). >>> You should now see: >>> >>> about to run compact... >>> Running compact >>> nextSync >>> ... >>> >>> the compact itself is still disabled. There should be no reason why this >>> stopps at this point now. >>> Can you please test and tell me if its working (if it is, I will enable >>> compact again, because then it was the function name thats the problem) >>> >> Now it seems to work: >> >> 600 - Finished syncing adress book >> Setting all messages to read... >> about to run compact... >> 2904 - Running compact >> 1 - nextSync >> 218 - Initialising calendar... >> 109 - Initialising calendar... >> 95 - Initialising calendar... >> 10 - Initialising calendar... >> > > Ok then its clear: it was the "name" of the function that called compact > that seemed to interfere with some other extension. I reenabled the > "compact" funcitonality again and created anew nightly... thanks guys and what about my problem that synckolab hang after ~2000 contacts?:-) thanks. -- Levente "Si vis pacem para bellum!" From niko.berger at corinis.com Fri Jun 6 02:32:06 2008 From: niko.berger at corinis.com (Niko Berger) Date: Fri, 06 Jun 2008 11:32:06 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <48490310.4060506@lfarkas.org> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> <4848DC75.9020800@kk.pte.hu> <4848F413.3080505@zone42.org> <4848F611.7030104@corinis.com> <4848FA86.6040908@zone42.org> <4848FB1E.9080807@corinis.com> <48490310.4060506@lfarkas.org> Message-ID: <48490416.5080206@corinis.com> Farkas Levente wrote: > Niko Berger wrote: > >> Steffen Sledz wrote: >> >>> Niko Berger schrieb: >>> >>> >>>> Hmmm... seems to be something else. I created a new nightly where i >>>> changed the messages a little bit (and renamed the function, maybe thats >>>> the problem). >>>> You should now see: >>>> >>>> about to run compact... >>>> Running compact >>>> nextSync >>>> ... >>>> >>>> the compact itself is still disabled. There should be no reason why this >>>> stopps at this point now. >>>> Can you please test and tell me if its working (if it is, I will enable >>>> compact again, because then it was the function name thats the problem) >>>> >>>> >>> Now it seems to work: >>> >>> 600 - Finished syncing adress book >>> Setting all messages to read... >>> about to run compact... >>> 2904 - Running compact >>> 1 - nextSync >>> 218 - Initialising calendar... >>> 109 - Initialising calendar... >>> 95 - Initialising calendar... >>> 10 - Initialising calendar... >>> >>> >> Ok then its clear: it was the "name" of the function that called compact >> that seemed to interfere with some other extension. I reenabled the >> "compact" funcitonality again and created anew nightly... thanks guys >> > > and what about my problem that synckolab hang after ~2000 contacts?:-) > thanks. > completely different problem here... I just took a close look and added an exception handling... check out if it works now Niko From mihaly.vukovics at kk.pte.hu Fri Jun 6 04:35:32 2008 From: mihaly.vukovics at kk.pte.hu (Vukovics Mihaly) Date: Fri, 06 Jun 2008 13:35:32 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <4848FB1E.9080807@corinis.com> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> <4848DC75.9020800@kk.pte.hu> <4848F413.3080505@zone42.org> <4848F611.7030104@corinis.com> <4848FA86.6040908@zone42.org> <4848FB1E.9080807@corinis.com> Message-ID: <48492104.2080204@kk.pte.hu> Hey, it just works!!! Thanks!!! Niko Berger wrote: > Steffen Sledz wrote: >> Niko Berger schrieb: >> >>> Hmmm... seems to be something else. I created a new nightly where i >>> changed the messages a little bit (and renamed the function, maybe thats >>> the problem). >>> You should now see: >>> >>> about to run compact... >>> Running compact >>> nextSync >>> ... >>> >>> the compact itself is still disabled. There should be no reason why this >>> stopps at this point now. >>> Can you please test and tell me if its working (if it is, I will enable >>> compact again, because then it was the function name thats the problem) >>> >> Now it seems to work: >> >> 600 - Finished syncing adress book >> Setting all messages to read... >> about to run compact... >> 2904 - Running compact >> 1 - nextSync >> 218 - Initialising calendar... >> 109 - Initialising calendar... >> 95 - Initialising calendar... >> 10 - Initialising calendar... >> > > Ok then its clear: it was the "name" of the function that called compact > that seemed to interfere with some other extension. I reenabled the > "compact" funcitonality again and created anew nightly... thanks guys > > Niko > _______________________________________________ > Synckolab mailing list > Synckolab at mozdev.org > https://www.mozdev.org/mailman/listinfo/synckolab > -- K?sz?nettel: Vukovics Mih?ly P?csi Tudom?nyegyetem Klinikai K?zpont Informatikai ?s Telekommunik?ci?s Vezet? / CIO P?cs, Honv?d utca 1. Tel: +36 72 536-400 Fax: +36 72 536-401 Mobil: +36 30 620 5304 Informatikai Vezet?k Tars?s?ga http://www.ivetar.hu From sledz at zone42.org Sat Jun 7 11:11:05 2008 From: sledz at zone42.org (Steffen Sledz) Date: Sat, 07 Jun 2008 20:11:05 +0200 Subject: [Synckolab] sync kills mozillaHomeUrl Message-ID: <484ACF39.5040705@zone42.org> When syncing local address book to IMAP SyncKolab (nightly build 1.0.1 06-06-2008 10:29) kills all mozillaHomeUrl attribs. :( From sledz at zone42.org Sun Jun 8 02:42:50 2008 From: sledz at zone42.org (Steffen Sledz) Date: Sun, 08 Jun 2008 11:42:50 +0200 Subject: [Synckolab] sync kills mozillaHomeUrl In-Reply-To: <484ACF39.5040705@zone42.org> References: <484ACF39.5040705@zone42.org> Message-ID: <484BA99A.7070905@zone42.org> Steffen Sledz schrieb: > When syncing local address book to IMAP SyncKolab (nightly build 1.0.1 > 06-06-2008 10:29) kills all mozillaHomeUrl attribs. :( I had a short look into contactTools.js. If i'm right there is just one attrib "web-page" (card.WebPage1), not two different for "home" and "business" like in Thunderbirds address tab. :( Should i create a ticket in the bug tracking for this? From niko.berger at corinis.com Sun Jun 8 06:14:19 2008 From: niko.berger at corinis.com (Niko Berger) Date: Sun, 08 Jun 2008 15:14:19 +0200 Subject: [Synckolab] sync kills mozillaHomeUrl In-Reply-To: <484BA99A.7070905@zone42.org> References: <484ACF39.5040705@zone42.org> <484BA99A.7070905@zone42.org> Message-ID: <484BDB2B.5030006@corinis.com> Steffen Sledz schrieb: > Steffen Sledz schrieb: > >> When syncing local address book to IMAP SyncKolab (nightly build 1.0.1 >> 06-06-2008 10:29) kills all mozillaHomeUrl attribs. :( >> > > I had a short look into contactTools.js. If i'm right there is just one > attrib "web-page" (card.WebPage1), not two different for "home" and > "business" like in Thunderbirds address tab. :( > > Should i create a ticket in the bug tracking for this? > _______________________________________________ > Synckolab mailing list > Synckolab at mozdev.org > https://www.mozdev.org/mailman/listinfo/synckolab > Yes, please, altough it should sync webpage2 as well (gott atake a close look at that :P) Niko From sledz at zone42.org Sun Jun 8 06:31:09 2008 From: sledz at zone42.org (Steffen Sledz) Date: Sun, 08 Jun 2008 15:31:09 +0200 Subject: [Synckolab] sync kills mozillaHomeUrl In-Reply-To: <484BDB2B.5030006@corinis.com> References: <484ACF39.5040705@zone42.org> <484BA99A.7070905@zone42.org> <484BDB2B.5030006@corinis.com> Message-ID: <484BDF1D.10407@zone42.org> Niko Berger schrieb: >> Should i create a ticket in the bug tracking for this? >> > Yes, please, > altough it should sync webpage2 as well (gott atake a close look at that :P) I created one: PS: Problem seems to be in card2Xml. From sandra.maury at enssib.fr Mon Jun 9 03:19:07 2008 From: sandra.maury at enssib.fr (Maury Sandra) Date: Mon, 9 Jun 2008 12:19:07 +0200 Subject: [Synckolab] synckolab and horde kronolith Message-ID: Hello, I installed a Kolab Server v2.2 rc 3 witch implemented a Horde Server. I have Thunderbird 2.0 and Lightning 0.8 on my PC and SyncKolab plugin 1.0.0. I created three imap folders in Thunderbird to synchronize Contacts, Calendar and Tasks. In Thunderbird I have an addressbook and only one event in my home calendar. When I start SyncKolab I can see all my contacts created in XML format in the right imap folder. And I can see the only event in the imap folder for calendar. But when I go on Horde Kronolith or Turba everything is empty. After, when I create an event in Kronolith and I start SyncKolab in Thunderbird, the corresponding mail in XLM format is not created in the imap folder calendar. I don't understand what's happen. When I look mail header in imap folder calendar I see that mail is sent to synckolab at no.tld and not to user. Thank you for your help. Sandra Maury Villeurbanne France Le Bureau Virtuel, un service mis en oeuvre et finance par la Region Rhone-Alpes / www.rhonealpes.fr From lfarkas at lfarkas.org Mon Jun 9 03:47:17 2008 From: lfarkas at lfarkas.org (Farkas Levente) Date: Mon, 09 Jun 2008 12:47:17 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <48490416.5080206@corinis.com> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> <4848DC75.9020800@kk.pte.hu> <4848F413.3080505@zone42.org> <4848F611.7030104@corinis.com> <4848FA86.6040908@zone42.org> <4848FB1E.9080807@corinis.com> <48490310.4060506@lfarkas.org> <48490416.5080206@corinis.com> Message-ID: <484D0A35.4030308@lfarkas.org> Niko Berger wrote: > Farkas Levente wrote: >> Niko Berger wrote: >> >>> Steffen Sledz wrote: >>> >>>> Niko Berger schrieb: >>>> >>>> >>>>> Hmmm... seems to be something else. I created a new nightly where i >>>>> changed the messages a little bit (and renamed the function, maybe thats >>>>> the problem). >>>>> You should now see: >>>>> >>>>> about to run compact... >>>>> Running compact >>>>> nextSync >>>>> ... >>>>> >>>>> the compact itself is still disabled. There should be no reason why this >>>>> stopps at this point now. >>>>> Can you please test and tell me if its working (if it is, I will enable >>>>> compact again, because then it was the function name thats the problem) >>>>> >>>>> >>>> Now it seems to work: >>>> >>>> 600 - Finished syncing adress book >>>> Setting all messages to read... >>>> about to run compact... >>>> 2904 - Running compact >>>> 1 - nextSync >>>> 218 - Initialising calendar... >>>> 109 - Initialising calendar... >>>> 95 - Initialising calendar... >>>> 10 - Initialising calendar... >>>> >>>> >>> Ok then its clear: it was the "name" of the function that called compact >>> that seemed to interfere with some other extension. I reenabled the >>> "compact" funcitonality again and created anew nightly... thanks guys >>> >> and what about my problem that synckolab hang after ~2000 contacts?:-) >> thanks. >> > completely different problem here... I just took a close look and added > an exception handling... check out if it works now still not working. this's the latest error log: Error: [Exception... "Component returned failure code: 0x80004002 (NS_NOINTERFACE) [nsIAbDirectory.deleteCards]" nsresult: "0x80004002 (NS_NOINTERFACE)" location: "JS frame :: chrome://synckolab/content/addressbook.js :: anonymous :: line 491" data: no] Sourcefile: chrome://synckolab/content/addressbook.js Line: 491 -- Levente "Si vis pacem para bellum!" From niko.berger at corinis.com Mon Jun 9 05:55:54 2008 From: niko.berger at corinis.com (Niko Berger) Date: Mon, 09 Jun 2008 14:55:54 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <484D0A35.4030308@lfarkas.org> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> <4848DC75.9020800@kk.pte.hu> <4848F413.3080505@zone42.org> <4848F611.7030104@corinis.com> <4848FA86.6040908@zone42.org> <4848FB1E.9080807@corinis.com> <48490310.4060506@lfarkas.org> <48490416.5080206@corinis.com> <484D0A35.4030308@lfarkas.org> Message-ID: <484D285A.2040009@corinis.com> Farkas Levente wrote: > Niko Berger wrote: > >> Farkas Levente wrote: >> >>> Niko Berger wrote: >>> >>> >>>> Steffen Sledz wrote: >>>> >>>> >>>>> Niko Berger schrieb: >>>>> >>>>> >>>>> >>>>>> Hmmm... seems to be something else. I created a new nightly where i >>>>>> changed the messages a little bit (and renamed the function, maybe thats >>>>>> the problem). >>>>>> You should now see: >>>>>> >>>>>> about to run compact... >>>>>> Running compact >>>>>> nextSync >>>>>> ... >>>>>> >>>>>> the compact itself is still disabled. There should be no reason why this >>>>>> stopps at this point now. >>>>>> Can you please test and tell me if its working (if it is, I will enable >>>>>> compact again, because then it was the function name thats the problem) >>>>>> >>>>>> >>>>>> >>>>> Now it seems to work: >>>>> >>>>> 600 - Finished syncing adress book >>>>> Setting all messages to read... >>>>> about to run compact... >>>>> 2904 - Running compact >>>>> 1 - nextSync >>>>> 218 - Initialising calendar... >>>>> 109 - Initialising calendar... >>>>> 95 - Initialising calendar... >>>>> 10 - Initialising calendar... >>>>> >>>>> >>>>> >>>> Ok then its clear: it was the "name" of the function that called compact >>>> that seemed to interfere with some other extension. I reenabled the >>>> "compact" funcitonality again and created anew nightly... thanks guys >>>> >>>> >>> and what about my problem that synckolab hang after ~2000 contacts?:-) >>> thanks. >>> >>> >> completely different problem here... I just took a close look and added >> an exception handling... check out if it works now >> > > still not working. this's the latest error log: > Error: [Exception... "Component returned failure code: 0x80004002 > (NS_NOINTERFACE) [nsIAbDirectory.deleteCards]" nsresult: "0x80004002 > (NS_NOINTERFACE)" location: "JS frame :: > chrome://synckolab/content/addressbook.js :: anonymous :: line 491" > data: no] > Sourcefile: chrome://synckolab/content/addressbook.js > Line: 491 > > put out a new nightly... i hope we have everything covered with that Niko From lfarkas at lfarkas.org Mon Jun 9 14:04:14 2008 From: lfarkas at lfarkas.org (Farkas Levente) Date: Mon, 09 Jun 2008 23:04:14 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <484D285A.2040009@corinis.com> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> <4848DC75.9020800@kk.pte.hu> <4848F413.3080505@zone42.org> <4848F611.7030104@corinis.com> <4848FA86.6040908@zone42.org> <4848FB1E.9080807@corinis.com> <48490310.4060506@lfarkas.org> <48490416.5080206@corinis.com> <484D0A35.4030308@lfarkas.org> <484D285A.2040009@corinis.com> Message-ID: <484D9ACE.2050105@lfarkas.org> Niko Berger wrote: > Farkas Levente wrote: >> Niko Berger wrote: >> >>> Farkas Levente wrote: >>> >>>> Niko Berger wrote: >>>> >>>> >>>>> Steffen Sledz wrote: >>>>> >>>>> >>>>>> Niko Berger schrieb: >>>>>> >>>>>> >>>>>> >>>>>>> Hmmm... seems to be something else. I created a new nightly where i >>>>>>> changed the messages a little bit (and renamed the function, maybe thats >>>>>>> the problem). >>>>>>> You should now see: >>>>>>> >>>>>>> about to run compact... >>>>>>> Running compact >>>>>>> nextSync >>>>>>> ... >>>>>>> >>>>>>> the compact itself is still disabled. There should be no reason why this >>>>>>> stopps at this point now. >>>>>>> Can you please test and tell me if its working (if it is, I will enable >>>>>>> compact again, because then it was the function name thats the problem) >>>>>>> >>>>>>> >>>>>>> >>>>>> Now it seems to work: >>>>>> >>>>>> 600 - Finished syncing adress book >>>>>> Setting all messages to read... >>>>>> about to run compact... >>>>>> 2904 - Running compact >>>>>> 1 - nextSync >>>>>> 218 - Initialising calendar... >>>>>> 109 - Initialising calendar... >>>>>> 95 - Initialising calendar... >>>>>> 10 - Initialising calendar... >>>>>> >>>>>> >>>>>> >>>>> Ok then its clear: it was the "name" of the function that called compact >>>>> that seemed to interfere with some other extension. I reenabled the >>>>> "compact" funcitonality again and created anew nightly... thanks guys >>>>> >>>>> >>>> and what about my problem that synckolab hang after ~2000 contacts?:-) >>>> thanks. >>>> >>>> >>> completely different problem here... I just took a close look and added >>> an exception handling... check out if it works now >>> >> still not working. this's the latest error log: >> Error: [Exception... "Component returned failure code: 0x80004002 >> (NS_NOINTERFACE) [nsIAbDirectory.deleteCards]" nsresult: "0x80004002 >> (NS_NOINTERFACE)" location: "JS frame :: >> chrome://synckolab/content/addressbook.js :: anonymous :: line 491" >> data: no] >> Sourcefile: chrome://synckolab/content/addressbook.js >> Line: 491 >> >> > > put out a new nightly... i hope we have everything covered with that it's working. thanks. -- Levente "Si vis pacem para bellum!" From AlainBechetoille at Brouns.fr Mon Jun 9 14:58:00 2008 From: AlainBechetoille at Brouns.fr (Alain Bechetoille) Date: Mon, 09 Jun 2008 23:58:00 +0200 Subject: [Synckolab] synckolab miss checking task due-date field Message-ID: <484DA768.9060800@Brouns.fr> When modifying just the field of a task, synckolab does not detect the modified task and, indeed, does not update the imap folder. Win2000 Thunderbird 2.0.0.14 Synckolab 1.0.0/1.0.1 From lfarkas at lfarkas.org Tue Jun 10 02:45:57 2008 From: lfarkas at lfarkas.org (Farkas Levente) Date: Tue, 10 Jun 2008 11:45:57 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <484D9ACE.2050105@lfarkas.org> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> <4848DC75.9020800@kk.pte.hu> <4848F413.3080505@zone42.org> <4848F611.7030104@corinis.com> <4848FA86.6040908@zone42.org> <4848FB1E.9080807@corinis.com> <48490310.4060506@lfarkas.org> <48490416.5080206@corinis.com> <484D0A35.4030308@lfarkas.org> <484D285A.2040009@corinis.com> <484D9ACE.2050105@lfarkas.org> Message-ID: <484E4D55.3070603@lfarkas.org> Farkas Levente wrote: > Niko Berger wrote: >> Farkas Levente wrote: >>> Niko Berger wrote: >>> >>>> Farkas Levente wrote: >>>> >>>>> Niko Berger wrote: >>>>> >>>>>> Steffen Sledz wrote: >>>>>> >>>>>>> Niko Berger schrieb: >>>>>>> >>>>>>>> Hmmm... seems to be something else. I created a new nightly >>>>>>>> where i changed the messages a little bit (and renamed the >>>>>>>> function, maybe thats the problem). >>>>>>>> You should now see: >>>>>>>> >>>>>>>> about to run compact... >>>>>>>> Running compact >>>>>>>> nextSync >>>>>>>> ... >>>>>>>> >>>>>>>> the compact itself is still disabled. There should be no reason >>>>>>>> why this stopps at this point now. >>>>>>>> Can you please test and tell me if its working (if it is, I will >>>>>>>> enable compact again, because then it was the function name >>>>>>>> thats the problem) >>>>>>>> >>>>>>> Now it seems to work: >>>>>>> >>>>>>> 600 - Finished syncing adress book >>>>>>> Setting all messages to read... >>>>>>> about to run compact... >>>>>>> 2904 - Running compact >>>>>>> 1 - nextSync >>>>>>> 218 - Initialising calendar... >>>>>>> 109 - Initialising calendar... >>>>>>> 95 - Initialising calendar... >>>>>>> 10 - Initialising calendar... >>>>>>> >>>>>> Ok then its clear: it was the "name" of the function that called >>>>>> compact that seemed to interfere with some other extension. I >>>>>> reenabled the "compact" funcitonality again and created anew >>>>>> nightly... thanks guys >>>>>> >>>>> and what about my problem that synckolab hang after ~2000 contacts?:-) >>>>> thanks. >>>>> >>>> completely different problem here... I just took a close look and >>>> added an exception handling... check out if it works now >>>> >>> still not working. this's the latest error log: >>> Error: [Exception... "Component returned failure code: 0x80004002 >>> (NS_NOINTERFACE) [nsIAbDirectory.deleteCards]" nsresult: "0x80004002 >>> (NS_NOINTERFACE)" location: "JS frame :: >>> chrome://synckolab/content/addressbook.js :: anonymous :: line 491" >>> data: no] >>> Sourcefile: chrome://synckolab/content/addressbook.js >>> Line: 491 >>> >>> >> >> put out a new nightly... i hope we have everything covered with that > > it's working. > thanks. what's the current which include this fix? now the there is two version on the site 1.0.1 and the nightly. the 1.0.1 already contains this fix or not? thanks. -- Levente "Si vis pacem para bellum!" From niko.berger at corinis.com Tue Jun 10 03:18:56 2008 From: niko.berger at corinis.com (Niko Berger) Date: Tue, 10 Jun 2008 12:18:56 +0200 Subject: [Synckolab] sync does not finish it's work In-Reply-To: <484E4D55.3070603@lfarkas.org> References: <483EE1E4.1040009@zone42.org> <4847DB3A.40101@corinis.com> <4847DC79.3030506@zone42.org> <4847DFAA.60909@corinis.com> <4848DC75.9020800@kk.pte.hu> <4848F413.3080505@zone42.org> <4848F611.7030104@corinis.com> <4848FA86.6040908@zone42.org> <4848FB1E.9080807@corinis.com> <48490310.4060506@lfarkas.org> <48490416.5080206@corinis.com> <484D0A35.4030308@lfarkas.org> <484D285A.2040009@corinis.com> <484D9ACE.2050105@lfarkas.org> <484E4D55.3070603@lfarkas.org> Message-ID: <484E5510.3030905@corinis.com> Farkas Levente wrote: > Farkas Levente wrote: > >> Niko Berger wrote: >> >>> Farkas Levente wrote: >>> >>>> Niko Berger wrote: >>>> >>>> >>>>> Farkas Levente wrote: >>>>> >>>>> >>>>>> Niko Berger wrote: >>>>>> >>>>>> >>>>>>> Steffen Sledz wrote: >>>>>>> >>>>>>> >>>>>>>> Niko Berger schrieb: >>>>>>>> >>>>>>>> >>>>>>>>> Hmmm... seems to be something else. I created a new nightly >>>>>>>>> where i changed the messages a little bit (and renamed the >>>>>>>>> function, maybe thats the problem). >>>>>>>>> You should now see: >>>>>>>>> >>>>>>>>> about to run compact... >>>>>>>>> Running compact >>>>>>>>> nextSync >>>>>>>>> ... >>>>>>>>> >>>>>>>>> the compact itself is still disabled. There should be no reason >>>>>>>>> why this stopps at this point now. >>>>>>>>> Can you please test and tell me if its working (if it is, I will >>>>>>>>> enable compact again, because then it was the function name >>>>>>>>> thats the problem) >>>>>>>>> >>>>>>>>> >>>>>>>> Now it seems to work: >>>>>>>> >>>>>>>> 600 - Finished syncing adress book >>>>>>>> Setting all messages to read... >>>>>>>> about to run compact... >>>>>>>> 2904 - Running compact >>>>>>>> 1 - nextSync >>>>>>>> 218 - Initialising calendar... >>>>>>>> 109 - Initialising calendar... >>>>>>>> 95 - Initialising calendar... >>>>>>>> 10 - Initialising calendar... >>>>>>>> >>>>>>>> >>>>>>> Ok then its clear: it was the "name" of the function that called >>>>>>> compact that seemed to interfere with some other extension. I >>>>>>> reenabled the "compact" funcitonality again and created anew >>>>>>> nightly... thanks guys >>>>>>> >>>>>>> >>>>>> and what about my problem that synckolab hang after ~2000 contacts?:-) >>>>>> thanks. >>>>>> >>>>>> >>>>> completely different problem here... I just took a close look and >>>>> added an exception handling... check out if it works now >>>>> >>>>> >>>> still not working. this's the latest error log: >>>> Error: [Exception... "Component returned failure code: 0x80004002 >>>> (NS_NOINTERFACE) [nsIAbDirectory.deleteCards]" nsresult: "0x80004002 >>>> (NS_NOINTERFACE)" location: "JS frame :: >>>> chrome://synckolab/content/addressbook.js :: anonymous :: line 491" >>>> data: no] >>>> Sourcefile: chrome://synckolab/content/addressbook.js >>>> Line: 491 >>>> >>>> >>>> >>> put out a new nightly... i hope we have everything covered with that >>> >> it's working. >> thanks. >> > > what's the current which include this fix? > now the there is two version on the site 1.0.1 and the nightly. the > 1.0.1 already contains this fix or not? > thanks. > > actually both do... the nightly is currently the same code as 1.0.1 From steve.dowe at onecool.com Wed Jun 18 05:58:57 2008 From: steve.dowe at onecool.com (Steve Dowe) Date: Wed, 18 Jun 2008 13:58:57 +0100 Subject: [Synckolab] Calendar views & task lists Message-ID: <48590691.7030501@onecool.com> Hi, I'm new to Kolab and this list.. but have been using Thunderbird a little while ;) We're looking at using Kolab2 for work, but because of certain add-ons for Thunderbird we'd probably be sticking with that instead of using Kontact as the client. I have two quick questions: 1) Can you use Thunderbird/SyncKolab to view colleagues' calendars? 2) Are you able to use any other facilities that Kolab offers, for example group calendar/task lists? oops, and... 3) Has anyone managed to get mobile device synchronisation with Thunderbird and/or Kolab? Sorry if I am asking difficult, pointless or highly amusing questions... Thanks, Steve From 0608 at leyk.de Thu Jun 19 10:49:55 2008 From: 0608 at leyk.de (Axel Leyk) Date: Thu, 19 Jun 2008 19:49:55 +0200 Subject: [Synckolab] Folder not found Message-ID: <485A9C43.60109@leyk.de> Hi there i'm new here and i'm german, so please forgive me my crude english! Synckolab doesn't work for me :-( I use: Windows Vista Home Premium SP 1 SyncKolab 1.0.1 Mozilla Thunderbird Version 2.0.0.14 (20080421) Lightning 0.8 (2008033120) Other addons: talkback german spellchecking 1.0.1 Usage: I have two imap accounts configured witch are both working fine. Problems: Fist odd thing: I can only select the second one to store dates, adresses - the first one can be selected on the first screen but the configuration on the second screen is alsways about the second one. Second odd thing: When i try to run synckolab i get the following message: "Folder 'imap://wp****@wp.webpack.hosteurope.de/adressen' not found! Please Check configuration Troubleshooting by faq: 1. Make sure you got a working imap connection Sending, reading, receiving mail - all works fine with both accounts 2. delete ALL configruation lines with synckolab out of your prefs.js (make sure that thunderbird is closed before doing so) Done 3. Try setting up synkolab agian... Done - again and again :-) both odd things persist 4. If that did not work check your prefs.js if following lines are present (if not add them): user_pref("SyncKolab..ContactFolderPath", "imap://user at imapserver.com/"); user_pref("SyncKolab..CalendarFolderPath", "imap://user at imapserver.com/"); Lines are present like: " user_pref("SyncKolab.Configs", "Kolab;"); user_pref("SyncKolab.Kolab.AddressBook", "abook-1.mab"); user_pref("SyncKolab.Kolab.AddressBookFormat", "Xml"); user_pref("SyncKolab.Kolab.Calendar", "Privat"); user_pref("SyncKolab.Kolab.CalendarFolderPath", "imap://wp****@wp.webpack.hosteurope.de/termine"); user_pref("SyncKolab.Kolab.CalendarFormat", "Xml"); user_pref("SyncKolab.Kolab.ContactFolderPath", "imap://wp****@wp.webpack.hosteurope.de/adressen"); user_pref("SyncKolab.Kolab.IncomingServer", "imapmessagewpaxelwpwebpackhosteuropede"); user_pref("SyncKolab.Kolab.Resolve", "ask"); user_pref("SyncKolab.Kolab.TaskFolderPath", "imap://wp****@wp.webpack.hosteurope.de/aufgaben"); user_pref("SyncKolab.Kolab.TaskFormat", "Xml"); user_pref("SyncKolab.Kolab.Tasks", "Privat"); user_pref("SyncKolab.Kolab.calSyncTimeframe", "180"); user_pref("SyncKolab.Kolab.saveToCalendarImap", true); user_pref("SyncKolab.Kolab.saveToContactImap", true); user_pref("SyncKolab.Kolab.saveToTaskImap", true); user_pref("SyncKolab.Kolab.syncCalendar", true); user_pref("SyncKolab.Kolab.syncContacts", true); user_pref("SyncKolab.Kolab.syncTasks", true); user_pref("SyncKolab.Kolab.taskSyncTimeframe", "180"); user_pref("SyncKolab.autoSync", "0"); user_pref("SyncKolab.closeWindow", false); user_pref("SyncKolab.debugLevel", "1"); user_pref("SyncKolab.hiddenWindow", true); " 5. If it still did not work please check for any messages in your javascript console and report to the mailing list " Fehler: syncAddressBook.folder has no properties Quelldatei: chrome://synckolab/content/synckolab.js Zeile: 301 " Lien 301 reads: " syncAddressBook.folderMsgURI = syncAddressBook.folder.baseMessageURI; " Any thoughts? Any help would really be appreciated! Thanks in advance - and don't hit me too hard, if it is my stupid error... Cu, Axel From niko.berger at corinis.com Thu Jun 19 22:41:20 2008 From: niko.berger at corinis.com (Niko Berger) Date: Fri, 20 Jun 2008 07:41:20 +0200 Subject: [Synckolab] Folder not found In-Reply-To: <485A9C43.60109@leyk.de> References: <485A9C43.60109@leyk.de> Message-ID: <485B4300.3070101@corinis.com> Axel Leyk schrieb: > Hi there i'm new here and i'm german, so please forgive me my crude english! > > Synckolab doesn't work for me :-( > > I use: > > Windows Vista Home Premium SP 1 > SyncKolab 1.0.1 > Mozilla Thunderbird Version 2.0.0.14 (20080421) > Lightning 0.8 (2008033120) > > Other addons: > > talkback > german spellchecking 1.0.1 > > Usage: > > I have two imap accounts configured witch are both working fine. > > Problems: > > Fist odd thing: I can only select the second one to store dates, > adresses - the first one can be selected on the first screen but the > configuration on the second screen is alsways about the second one. > > Second odd thing: When i try to run synckolab i get the following message: > > "Folder 'imap://wp****@wp.webpack.hosteurope.de/adressen' not found! > Please Check configuration > > Troubleshooting by faq: > > 1. Make sure you got a working imap connection > > Sending, reading, receiving mail - all works fine with both accounts > > 2. delete ALL configruation lines with synckolab out of your > prefs.js (make sure that thunderbird is closed before doing so) > > Done > > 3. Try setting up synkolab agian... > > Done - again and again :-) both odd things persist > > 4. If that did not work check your prefs.js if following lines are > present (if not add them): > > user_pref("SyncKolab..ContactFolderPath", > "imap://user at imapserver.com/"); > user_pref("SyncKolab..CalendarFolderPath", > "imap://user at imapserver.com/"); > > Lines are present like: > > " > user_pref("SyncKolab.Configs", "Kolab;"); > user_pref("SyncKolab.Kolab.AddressBook", "abook-1.mab"); > user_pref("SyncKolab.Kolab.AddressBookFormat", "Xml"); > user_pref("SyncKolab.Kolab.Calendar", "Privat"); > user_pref("SyncKolab.Kolab.CalendarFolderPath", > "imap://wp****@wp.webpack.hosteurope.de/termine"); > user_pref("SyncKolab.Kolab.CalendarFormat", "Xml"); > user_pref("SyncKolab.Kolab.ContactFolderPath", > "imap://wp****@wp.webpack.hosteurope.de/adressen"); > user_pref("SyncKolab.Kolab.IncomingServer", > "imapmessagewpaxelwpwebpackhosteuropede"); > user_pref("SyncKolab.Kolab.Resolve", "ask"); > user_pref("SyncKolab.Kolab.TaskFolderPath", > "imap://wp****@wp.webpack.hosteurope.de/aufgaben"); > user_pref("SyncKolab.Kolab.TaskFormat", "Xml"); > user_pref("SyncKolab.Kolab.Tasks", "Privat"); > user_pref("SyncKolab.Kolab.calSyncTimeframe", "180"); > user_pref("SyncKolab.Kolab.saveToCalendarImap", true); > user_pref("SyncKolab.Kolab.saveToContactImap", true); > user_pref("SyncKolab.Kolab.saveToTaskImap", true); > user_pref("SyncKolab.Kolab.syncCalendar", true); > user_pref("SyncKolab.Kolab.syncContacts", true); > user_pref("SyncKolab.Kolab.syncTasks", true); > user_pref("SyncKolab.Kolab.taskSyncTimeframe", "180"); > user_pref("SyncKolab.autoSync", "0"); > user_pref("SyncKolab.closeWindow", false); > user_pref("SyncKolab.debugLevel", "1"); > user_pref("SyncKolab.hiddenWindow", true); > " > > > 5. If it still did not work please check for any messages in your > javascript console and report to the mailing list > > " > Fehler: syncAddressBook.folder has no properties > Quelldatei: chrome://synckolab/content/synckolab.js > Zeile: 301 > " > > Lien 301 reads: > > " > syncAddressBook.folderMsgURI = syncAddressBook.folder.baseMessageURI; > " > > Any thoughts? Any help would really be appreciated! > > Thanks in advance - and don't hit me too hard, if it is my stupid error... > > Cu, Axel > > > > Ok, your problem is, that the uri of the folders aren't correct. Maybe try modifying the folder paths in the prefs.js You have: imap://wp****@wp.webpack.hosteurope.de/adressen try instead: imap://wp****@wp.webpack.hosteurope.de/INBOX/adressen (might also be inbox or Inbox - this is case sensetive) You do not happen to know what imap server you are using? Hope that helps Niko From 0608 at leyk.de Fri Jun 20 04:12:32 2008 From: 0608 at leyk.de (Axel Leyk) Date: Fri, 20 Jun 2008 13:12:32 +0200 Subject: [Synckolab] Folder not found In-Reply-To: <485B4300.3070101@corinis.com> References: <485A9C43.60109@leyk.de> <485B4300.3070101@corinis.com> Message-ID: <485B90A0.5010503@leyk.de> Niko Berger schrieb: > Axel Leyk schrieb: >> Hi there i'm new here and i'm german, so please forgive me my crude english! >> >> Synckolab doesn't work for me :-( >> >> I use: >> >> Windows Vista Home Premium SP 1 >> SyncKolab 1.0.1 >> Mozilla Thunderbird Version 2.0.0.14 (20080421) >> Lightning 0.8 (2008033120) >> >> Other addons: >> >> talkback >> german spellchecking 1.0.1 >> >> Usage: >> >> I have two imap accounts configured witch are both working fine. >> >> Problems: >> >> Fist odd thing: I can only select the second one to store dates, >> adresses - the first one can be selected on the first screen but the >> configuration on the second screen is alsways about the second one. >> >> Second odd thing: When i try to run synckolab i get the following message: >> >> "Folder 'imap://wp****@wp.webpack.hosteurope.de/adressen' not found! >> Please Check configuration >> >> Troubleshooting by faq: >> >> 1. Make sure you got a working imap connection >> >> Sending, reading, receiving mail - all works fine with both accounts >> >> 2. delete ALL configruation lines with synckolab out of your >> prefs.js (make sure that thunderbird is closed before doing so) >> >> Done >> >> 3. Try setting up synkolab agian... >> >> Done - again and again :-) both odd things persist >> >> 4. If that did not work check your prefs.js if following lines are >> present (if not add them): >> >> user_pref("SyncKolab..ContactFolderPath", >> "imap://user at imapserver.com/"); >> user_pref("SyncKolab..CalendarFolderPath", >> "imap://user at imapserver.com/"); >> >> Lines are present like: >> >> " >> user_pref("SyncKolab.Configs", "Kolab;"); >> user_pref("SyncKolab.Kolab.AddressBook", "abook-1.mab"); >> user_pref("SyncKolab.Kolab.AddressBookFormat", "Xml"); >> user_pref("SyncKolab.Kolab.Calendar", "Privat"); >> user_pref("SyncKolab.Kolab.CalendarFolderPath", >> "imap://wp****@wp.webpack.hosteurope.de/termine"); >> user_pref("SyncKolab.Kolab.CalendarFormat", "Xml"); >> user_pref("SyncKolab.Kolab.ContactFolderPath", >> "imap://wp****@wp.webpack.hosteurope.de/adressen"); >> user_pref("SyncKolab.Kolab.IncomingServer", >> "imapmessagewpaxelwpwebpackhosteuropede"); >> user_pref("SyncKolab.Kolab.Resolve", "ask"); >> user_pref("SyncKolab.Kolab.TaskFolderPath", >> "imap://wp****@wp.webpack.hosteurope.de/aufgaben"); >> user_pref("SyncKolab.Kolab.TaskFormat", "Xml"); >> user_pref("SyncKolab.Kolab.Tasks", "Privat"); >> user_pref("SyncKolab.Kolab.calSyncTimeframe", "180"); >> user_pref("SyncKolab.Kolab.saveToCalendarImap", true); >> user_pref("SyncKolab.Kolab.saveToContactImap", true); >> user_pref("SyncKolab.Kolab.saveToTaskImap", true); >> user_pref("SyncKolab.Kolab.syncCalendar", true); >> user_pref("SyncKolab.Kolab.syncContacts", true); >> user_pref("SyncKolab.Kolab.syncTasks", true); >> user_pref("SyncKolab.Kolab.taskSyncTimeframe", "180"); >> user_pref("SyncKolab.autoSync", "0"); >> user_pref("SyncKolab.closeWindow", false); >> user_pref("SyncKolab.debugLevel", "1"); >> user_pref("SyncKolab.hiddenWindow", true); >> " >> >> >> 5. If it still did not work please check for any messages in your >> javascript console and report to the mailing list >> >> " >> Fehler: syncAddressBook.folder has no properties >> Quelldatei: chrome://synckolab/content/synckolab.js >> Zeile: 301 >> " >> >> Lien 301 reads: >> >> " >> syncAddressBook.folderMsgURI = syncAddressBook.folder.baseMessageURI; >> " >> >> Any thoughts? Any help would really be appreciated! >> >> Thanks in advance - and don't hit me too hard, if it is my stupid error... >> >> Cu, Axel >> >> >> >> > Ok, your problem is, that the uri of the folders aren't correct. Maybe > try modifying the folder paths in the prefs.js > You have: > > imap://wp****@wp.webpack.hosteurope.de/adressen > > try instead: > > imap://wp****@wp.webpack.hosteurope.de/INBOX/adressen > > (might also be inbox or Inbox - this is case sensetive) > > > > You do not happen to know what imap server you are using? > > Hope that helps > > Niko Hi Niko! I think the uri was correct for my server, because the folders are in the root directory - anyway i adjusted the folder path in prefs.js to match your suggestion - doesn't work - the error stays the same. Then i also adjusted the folder paths on the imap server by moving the folder from root to INBOX - not working either. From the greeting: "* OK dovecot ready." i presume my hoster (www.hosteurope.de) is using the opensource imap server from http://www.dovecot.org/ Server states himself as "IMAP4rev1" with capability "IMAP4rev1 SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN LISTEXT LIST-SUBSCRIBED NAMESPACE AUTH=PLAIN" Any more hints, where to look? Thanks in advance! Cu, Axel From niko.berger at corinis.com Fri Jun 20 04:20:42 2008 From: niko.berger at corinis.com (Niko Berger) Date: Fri, 20 Jun 2008 13:20:42 +0200 Subject: [Synckolab] Folder not found In-Reply-To: <485B90A0.5010503@leyk.de> References: <485A9C43.60109@leyk.de> <485B4300.3070101@corinis.com> <485B90A0.5010503@leyk.de> Message-ID: <485B928A.4010809@corinis.com> Axel Leyk wrote: > Niko Berger schrieb: > >> Axel Leyk schrieb: >> >>> Hi there i'm new here and i'm german, so please forgive me my crude english! >>> >>> Synckolab doesn't work for me :-( >>> >>> I use: >>> >>> Windows Vista Home Premium SP 1 >>> SyncKolab 1.0.1 >>> Mozilla Thunderbird Version 2.0.0.14 (20080421) >>> Lightning 0.8 (2008033120) >>> >>> Other addons: >>> >>> talkback >>> german spellchecking 1.0.1 >>> >>> Usage: >>> >>> I have two imap accounts configured witch are both working fine. >>> >>> Problems: >>> >>> Fist odd thing: I can only select the second one to store dates, >>> adresses - the first one can be selected on the first screen but the >>> configuration on the second screen is alsways about the second one. >>> >>> Second odd thing: When i try to run synckolab i get the following message: >>> >>> "Folder 'imap://wp****@wp.webpack.hosteurope.de/adressen' not found! >>> Please Check configuration >>> >>> Troubleshooting by faq: >>> >>> 1. Make sure you got a working imap connection >>> >>> Sending, reading, receiving mail - all works fine with both accounts >>> >>> 2. delete ALL configruation lines with synckolab out of your >>> prefs.js (make sure that thunderbird is closed before doing so) >>> >>> Done >>> >>> 3. Try setting up synkolab agian... >>> >>> Done - again and again :-) both odd things persist >>> >>> 4. If that did not work check your prefs.js if following lines are >>> present (if not add them): >>> >>> user_pref("SyncKolab..ContactFolderPath", >>> "imap://user at imapserver.com/"); >>> user_pref("SyncKolab..CalendarFolderPath", >>> "imap://user at imapserver.com/"); >>> >>> Lines are present like: >>> >>> " >>> user_pref("SyncKolab.Configs", "Kolab;"); >>> user_pref("SyncKolab.Kolab.AddressBook", "abook-1.mab"); >>> user_pref("SyncKolab.Kolab.AddressBookFormat", "Xml"); >>> user_pref("SyncKolab.Kolab.Calendar", "Privat"); >>> user_pref("SyncKolab.Kolab.CalendarFolderPath", >>> "imap://wp****@wp.webpack.hosteurope.de/termine"); >>> user_pref("SyncKolab.Kolab.CalendarFormat", "Xml"); >>> user_pref("SyncKolab.Kolab.ContactFolderPath", >>> "imap://wp****@wp.webpack.hosteurope.de/adressen"); >>> user_pref("SyncKolab.Kolab.IncomingServer", >>> "imapmessagewpaxelwpwebpackhosteuropede"); >>> user_pref("SyncKolab.Kolab.Resolve", "ask"); >>> user_pref("SyncKolab.Kolab.TaskFolderPath", >>> "imap://wp****@wp.webpack.hosteurope.de/aufgaben"); >>> user_pref("SyncKolab.Kolab.TaskFormat", "Xml"); >>> user_pref("SyncKolab.Kolab.Tasks", "Privat"); >>> user_pref("SyncKolab.Kolab.calSyncTimeframe", "180"); >>> user_pref("SyncKolab.Kolab.saveToCalendarImap", true); >>> user_pref("SyncKolab.Kolab.saveToContactImap", true); >>> user_pref("SyncKolab.Kolab.saveToTaskImap", true); >>> user_pref("SyncKolab.Kolab.syncCalendar", true); >>> user_pref("SyncKolab.Kolab.syncContacts", true); >>> user_pref("SyncKolab.Kolab.syncTasks", true); >>> user_pref("SyncKolab.Kolab.taskSyncTimeframe", "180"); >>> user_pref("SyncKolab.autoSync", "0"); >>> user_pref("SyncKolab.closeWindow", false); >>> user_pref("SyncKolab.debugLevel", "1"); >>> user_pref("SyncKolab.hiddenWindow", true); >>> " >>> >>> >>> 5. If it still did not work please check for any messages in your >>> javascript console and report to the mailing list >>> >>> " >>> Fehler: syncAddressBook.folder has no properties >>> Quelldatei: chrome://synckolab/content/synckolab.js >>> Zeile: 301 >>> " >>> >>> Lien 301 reads: >>> >>> " >>> syncAddressBook.folderMsgURI = syncAddressBook.folder.baseMessageURI; >>> " >>> >>> Any thoughts? Any help would really be appreciated! >>> >>> Thanks in advance - and don't hit me too hard, if it is my stupid error... >>> >>> Cu, Axel >>> >>> >>> >>> >>> >> Ok, your problem is, that the uri of the folders aren't correct. Maybe >> try modifying the folder paths in the prefs.js >> You have: >> >> imap://wp****@wp.webpack.hosteurope.de/adressen >> >> try instead: >> >> imap://wp****@wp.webpack.hosteurope.de/INBOX/adressen >> >> (might also be inbox or Inbox - this is case sensetive) >> >> >> >> You do not happen to know what imap server you are using? >> >> Hope that helps >> >> Niko >> > > Hi Niko! > > I think the uri was correct for my server, because the folders are in > the root directory - anyway i adjusted the folder path in prefs.js to > match your suggestion - doesn't work - the error stays the same. > > Then i also adjusted the folder paths on the imap server by moving the > folder from root to INBOX - not working either. > > From the greeting: "* OK dovecot ready." i presume my hoster > (www.hosteurope.de) is using the opensource imap server from > http://www.dovecot.org/ > > Server states himself as "IMAP4rev1" > > with capability "IMAP4rev1 SORT THREAD=REFERENCES MULTIAPPEND UNSELECT > LITERAL+ IDLE CHILDREN LISTEXT LIST-SUBSCRIBED NAMESPACE AUTH=PLAIN" > > Any more hints, where to look? > > Thanks in advance! > > Cu, Axel > hmmm i am afraid not really, maybe search through the mailing list and check if someone else with dovecot got it running. I seem to remember someone who had a similar problem and fixed it.. but i dont remember what he did any more. the only other thing that comes to me is, that another extension is messing with synckolab, but talkback and german spellchecking should really not interfere here... Niko Niko From rbalasus at gmail.com Fri Jun 20 04:33:38 2008 From: rbalasus at gmail.com (Randolf Balasus) Date: Fri, 20 Jun 2008 13:33:38 +0200 Subject: [Synckolab] synckolab hangs on synchronizing Message-ID: <485B9592.7080302@gmail.com> Hello, initial I have uploaded 1600 datasets from a mac to an imap account through mac osx, thundebrird and synckolab, now I want to synchronize this with my other dvices, linux and windows computers... but all other platforms are hanging on entry number: 1132 ID is unknown, status is parsing, content is unknown. The error console shows: Error: cur.firstChild has no properties Source File: chrome://synckolab/content/calTools.js Line: 485 Maybe there is one entry invalid.... What is the preferred way to find and delete this entry? I don?t understanbd the sort order, so I am not able to find the appropriate mail.... In thunderbird all mails seems to be valid (in the headline) installing the nightly build seems not to work.... Any Ideas? REGARDS Randolf Balasus From niko.berger at corinis.com Fri Jun 20 04:41:05 2008 From: niko.berger at corinis.com (Niko Berger) Date: Fri, 20 Jun 2008 13:41:05 +0200 Subject: [Synckolab] synckolab hangs on synchronizing In-Reply-To: <485B9592.7080302@gmail.com> References: <485B9592.7080302@gmail.com> Message-ID: <485B9751.3060905@corinis.com> Randolf Balasus wrote: > Hello, initial I have uploaded 1600 datasets from a mac to an imap > account through mac osx, thundebrird and synckolab, now I want to > synchronize this with my other dvices, linux and windows computers... > but all other platforms are hanging on entry number: 1132 > ID is unknown, status is parsing, content is unknown. The error console > shows: > > Error: cur.firstChild has no properties > Source File: chrome://synckolab/content/calTools.js > Line: 485 > > Maybe there is one entry invalid.... What is the preferred way to find > and delete this entry? > I don?t understanbd the sort order, so I am not able to find the > appropriate mail.... In thunderbird all mails seems to be valid (in the > headline) > installing the nightly build seems not to work.... > Any Ideas? > REGARDS Randolf Balasus > > Sort order is based on imap message (so ther eis actually none) - I fixed this and created a new nightly... its already available.. Niko From rbalasus at gmail.com Fri Jun 20 04:49:10 2008 From: rbalasus at gmail.com (Randolf Balasus) Date: Fri, 20 Jun 2008 13:49:10 +0200 Subject: [Synckolab] synckolab hangs on synchronizing In-Reply-To: <485B9751.3060905@corinis.com> References: <485B9592.7080302@gmail.com> <485B9751.3060905@corinis.com> Message-ID: <485B9936.90403@gmail.com> > Sort order is based on imap message (so ther eis actually none) - I > fixed this and created a new nightly... > > its already available.. > > Thanx for your answer, when it is available? Available from tomorrow (in the next nightly?) or still available at this time? Where can I see the version of the installed addon? I experienced: I have installed a nightly build over the version 1.0.1, but was not sure which version is working... How can I investigate this... REGARDS Randolf Balasus From niko.berger at corinis.com Fri Jun 20 04:48:31 2008 From: niko.berger at corinis.com (Niko Berger) Date: Fri, 20 Jun 2008 13:48:31 +0200 Subject: [Synckolab] synckolab hangs on synchronizing In-Reply-To: <485B9936.90403@gmail.com> References: <485B9592.7080302@gmail.com> <485B9751.3060905@corinis.com> <485B9936.90403@gmail.com> Message-ID: <485B990F.4060209@corinis.com> Randolf Balasus wrote: >> Sort order is based on imap message (so ther eis actually none) - I >> fixed this and created a new nightly... >> >> its already available.. >> >> >> > Thanx for your answer, when it is available? Available from tomorrow (in > the next nightly?) or still available at this time? > Where can I see the version of the installed addon? I experienced: I > have installed a nightly build over the version 1.0.1, but was not sure > which version is working... > How can I investigate this... > REGARDS Randolf Balasus > > _______________________________________________ > Synckolab mailing list > Synckolab at mozdev.org > https://www.mozdev.org/mailman/listinfo/synckolab > its already available... i build the nightlies "on-the-fly" when i check my stuff in (since its not that much effort to build) Niko From rbalasus at gmail.com Fri Jun 20 05:00:24 2008 From: rbalasus at gmail.com (Randolf Balasus) Date: Fri, 20 Jun 2008 14:00:24 +0200 Subject: [Synckolab] synckolab hangs on synchronizing In-Reply-To: <485B990F.4060209@corinis.com> References: <485B9592.7080302@gmail.com> <485B9751.3060905@corinis.com> <485B9936.90403@gmail.com> <485B990F.4060209@corinis.com> Message-ID: <485B9BD8.8010509@gmail.com> I installed the version from this link: http://www.gargan.org/extensions/synckolab-NIGHTLY.xpi but the procedure is hanging exactly on position 1132, this addon seems to work a little bit faster, but verion number is showed as 1.0.1 nghtly.... Any ideas? Randolf Balasus From niko.berger at corinis.com Fri Jun 20 05:05:57 2008 From: niko.berger at corinis.com (Niko Berger) Date: Fri, 20 Jun 2008 14:05:57 +0200 Subject: [Synckolab] synckolab hangs on synchronizing In-Reply-To: <485B9BD8.8010509@gmail.com> References: <485B9592.7080302@gmail.com> <485B9751.3060905@corinis.com> <485B9936.90403@gmail.com> <485B990F.4060209@corinis.com> <485B9BD8.8010509@gmail.com> Message-ID: <485B9D25.9070708@corinis.com> Randolf Balasus wrote: > I installed the version from this link: > http://www.gargan.org/extensions/synckolab-NIGHTLY.xpi > > but the procedure is hanging exactly on position 1132, this addon seems > to work a little bit faster, but verion number is showed as 1.0.1 nghtly.... > Any ideas? > Randolf Balasus > yea, its still 1.0.1 in the version field, i have a few bigger changes which will be introduced with the version number change, but the date/time should be visible and indicate the new version. For your "hanging": I need to know what error messages are displayed. It shouldnt be cur.firstChild has no properties and more, becuase this is fixed Niko From rbalasus at gmail.com Fri Jun 20 06:04:52 2008 From: rbalasus at gmail.com (Randolf Balasus) Date: Fri, 20 Jun 2008 15:04:52 +0200 Subject: [Synckolab] synckolab hangs on synchronizing In-Reply-To: <485B9D25.9070708@corinis.com> References: <485B9592.7080302@gmail.com> <485B9751.3060905@corinis.com> <485B9936.90403@gmail.com> <485B990F.4060209@corinis.com> <485B9BD8.8010509@gmail.com> <485B9D25.9070708@corinis.com> Message-ID: <485BAAF4.10001@gmail.com> Hah, I got it.... when I set log level to debug, then I can see the appropriate message summary:null when this is included, no further actions are going on , and synckolab stops working... From rbalasus at gmail.com Fri Jun 20 06:05:59 2008 From: rbalasus at gmail.com (Randolf Balasus) Date: Fri, 20 Jun 2008 15:05:59 +0200 Subject: [Synckolab] synckolab hangs on synchronizing Message-ID: <485BAB37.5040407@gmail.com> problem message is attached -------------- next part -------------- An embedded message was scrubbed... From: synckolab at balasus.eu Subject: 80654575-B3D2-43E7-B57E-054BEAE3DCE5 Date: Thu, 19 June 2008 22:14:41 +0200 Size: 1771 Url: http://www.mozdev.org/pipermail/synckolab/attachments/20080620/b805afa8/attachment.eml From tkrah at fachschaft.imn.htwk-leipzig.de Mon Jun 30 02:24:27 2008 From: tkrah at fachschaft.imn.htwk-leipzig.de (Torsten Krah) Date: Mon, 30 Jun 2008 11:24:27 +0200 Subject: [Synckolab] Annotation regognition - more than "one" folder for contacts, calendars, taks, how to use them? Message-ID: <200806301124.30102.tkrah@fachschaft.imn.htwk-leipzig.de> Hi. It seams synckolab does not automatically find the folders where to search for calendars, tasks or contacts. They are annotated and should be found. However, i got 2 calendar and contact folders - how to add both (as they are not found like written above) to one account, i can't select more than one folder in the configuration dialog, or did i miss something? Torsten -- Bitte senden Sie mir keine Word- oder PowerPoint-Anh?nge. Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html Really, I'm not out to destroy Microsoft. That will just be a completely unintentional side effect." -- Linus Torvalds -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/pkcs7-signature Size: 1996 bytes Desc: not available Url : http://www.mozdev.org/pipermail/synckolab/attachments/20080630/bc71a149/attachment.bin From niko.berger at corinis.com Mon Jun 30 03:02:27 2008 From: niko.berger at corinis.com (Niko Berger) Date: Mon, 30 Jun 2008 12:02:27 +0200 Subject: [Synckolab] Annotation regognition - more than "one" folder for contacts, calendars, taks, how to use them? In-Reply-To: <200806301124.30102.tkrah@fachschaft.imn.htwk-leipzig.de> References: <200806301124.30102.tkrah@fachschaft.imn.htwk-leipzig.de> Message-ID: <4868AF33.9020806@corinis.com> Torsten Krah wrote: > Hi. > It seams synckolab does not automatically find the folders where to search for > calendars, tasks or contacts. They are annotated and should be found. > > I know, but since thunderbird does not understand annotations for folders and also does not provide an interface. there is nothing much I can do. > However, i got 2 calendar and contact folders - how to add both (as they are > not found like written above) to one account, i can't select more than one > folder in the configuration dialog, or did i miss something? > You can have multiple configurations pointing to the same account. so you create two configurations with each one calendar and one contact (make sure to use a different address book for each.. otherwise things might get pretty messy) > Torsten > Niko From jamundso at gmail.com Mon Jun 30 20:24:19 2008 From: jamundso at gmail.com (Jerry Amundson) Date: Mon, 30 Jun 2008 22:24:19 -0500 Subject: [Synckolab] congrats Message-ID: <6d06ce20806302024r15cc073cif8af1683c40cf75f@mail.gmail.com> Just noticed the attention given at the Kolab site http://www.kolab.org/about-kolab-clients.html Well done Niko, Andreas, and others - a nice milestone. jerry ---------------- Now playing: Maroon 5 - Wake Up Call http://foxytunes.com/artist/maroon+5/track/wake+up+call